MCOHome Touch Panel Switch MH-S312 Two Gangs

AED 366

  • Wall switch with 2 integrated relays and scene controller
  • Suitable for British wall boxes
  • Stylish glass touch switch (white) with four buttons
  • Ready-to-fit, incl. glass frame
  • Replaces complete wall switch
  • 2 Relays with up to 1,100W / 230VAC each
  • Integrated status LED
  • Enables Associations
  • For 3-wire systems, neutral needed
  • Wireless Technology: Z-Wave Plus Z-wave EU
SKU: N/A Category:

Control Lights or scenarios

The MCOHome 2 gangs touch panel switch is a two gangs Zwave touch panel that is perfect touch panel as you can use it to control lights, devices or run whole scenarios that control the whole house.

Buying MCOHome devices from iHomeFuture from UAE will also gives you the access to full support and advise to design your whole house and use more integration that can cover other devices in the house as well.

The MCOHome MH-S312 Gen5 is a wall switch with 4 integrated switch relays for British standard wall boxes allowing you to control scenes with it. The relays can be controlled both with the touch switches, which are integrated into the glass surface and via Z-Wave commands.

It's designed to work with lighting devices, fans, or any other Z-Wave certified device that requires less than 5A. The relay can switch a load with up to 1,100 watts.

With the new function of the scene control now you are able to start your configured scenes with only one touch.

Control Z-Wave devices wirelessly

Z-Wave MCOHome Touch Panel Switch can be configured to wirelessly Z-Wave devices in your home automation system. The connected Single-Load switch can be configured to switch up to five nodes or terminals, and can also be used to monitor the state of the connected devices.

Designed for Lighting Devices

MCOHome Touch Panel switch has been designed to work with connected smart lighting appliances like bulbs, CFLs, ballasts, motors or fans.

Easy Installation

Z-Wave MCOHome Touch Panel can be conveniently installed onto the junction box with just two screws.

With the MCOHome wall switch, you can replace any switch insert or toggle switch. The wall switch can be mounted on any flush box and is made for British standard wall boxes, therefore it can't be used in German wall boxes.

With the stylish glass wall switches by MCOHome, you can easily integrate your already installed lights into your home automation network. Without installing any new cable, you can switch your lighting as usual via wall switch – but thanks to Z-Wave technology also via remote control, smartphone or sensor-controlled automation.

Other Details

Article Dimensions (WxHxL) 85.8 x 41.83 x 85.93 mm
Package Dimensions (WxHxL) 115.5 x 53.72 x 114.5 mm
Article net weight 0.180 Kg
Article gross weight 0.306 Kg
Z-Wave Plus Yes
CE Yes
IP-Rating IP20


All MCOHome products purchased from iHomeFuture come with two years extended warranty