HELTUN High Load Switch Z-wave Plus v2

AED 414

HELTUN High Load Switch Z-Wave Plus V2

  • Maximum load of 16A
  • Dimensions: 50x50x26mm
  • Pilot wire input for external control
  • Built-in real time energy consumption meter
  • Advanced zero-cross technology
  • Socket Auto On/Off function
  • 8 safety functions with warning notifications
  • Z-Wave Plus V2 and CE certified

10 in stock

SKU: HE-HLS01 Categories: , Tag:

The Control is in your hand

The HELTUN High Load Switch with Thermostat Functions fits easily behind outlets making them ‘Impossibly Smart’ with over-the-Internet control and advanced programmability. In addition, built-in Power Consumption System helps to monitor how much energy was used.The High Load Switch also adds safety to your home by protecting against overloads, overheat, over voltage, spark and surge conditions.

Impossibly Small

Impossibly Smart

The High Load Switch with Thermostat Functions brings incredible capabilities to any connected device. It makes electric outlets and whole banks of lights ‘smart’ with full remote monitoring, control, and advanced programmability. You can now enable Internet-connected thermostat functions where a local display and controls are not needed, such as with roof or driveway de-icing systems, etc. This brings the convenience of smartphone app control and programmability to ‘dumb’ devices such as electrical outlets & panels, electric water heaters, radiators, fireplaces, and radiant floor or de-icing systems. At 26mm in depth, the High Load Switch is also impossibly small, fitting into any rectangular, round or square electrical junction box, even behind an attached device.

Make Circuit Breakers Smart

Since the HELTUN High Load Switch can handle up to 16 Amp loads, it is a perfect addition to your circuit breaker panel for monitoring and controlling groups of devices from the Internet through a Z-Wave gateway, such as: Outlets connected to major appliances, Outlets connected to high load small appliances, Entire groups of electric outlets, Entire groups of lights. The Micromodule Mounting Adaptor is available from HELTUN as an accessory for the High Load Switch to fit standard DIN rails (50mm width), or it can also be mounted directly on the wall using the supplied screws & anchors.

Know How Much Energy You Use

The HELTUN built-in Power Consumption System precisely monitors how much energy has passed through your High Load Switch during any particular day, week, or month. With the High Load Switch, you can determine how much energy is used by major appliances, entertainment systems, computers, small appliances, or entire lighting systems.We have also designed the circuitry so it draws almost zero watts to power itself when in standby mode. This saves you energy and money even if your home is equipped with many HELTUN products.

SAFETY

There are a number of ways that the High Load Switch can add to the safety of your home.

  • Overload – If the High Load Switch detects too much wattage being drawn from connected devices - such as multiple connected electric outlets - it will automatically shut down to protect against circuit overload. This is useful for many applications where multiple loads are connected to one High Load Switch.

  • Overheat – The High Load Switch also constantly monitors temperature offering multiple layers of protection. With an external NTC sensor, it monitors the temperatures inside the junction box enabling automatic disconnection, and notification of the user, if an outlet gets too hot. It can even notify the user of rising temperatures prior to reaching a critical shutoff level, after which it will automatically shut off the outlet when it crosses a dangerous threshold.

  • High Load Timeout – If a family member leaves a device turned ON that draws a lot of power for a long time - such as a clothes iron connected for more than 1 hour - the High Load Switch can be configured to automatically shut OFF connected outlets to prevent a fire.

Users can define the high load, time, and temperature shutoff limits and notification settings in the High Load Switch parameters using a Z-Wave controller.

Easy Installation

The HELTUN High Load Switch can be easily installed into any standard electrical junction box (rectangular, square, or round) in just minutes. Installation must only be performed by someone trained in handling high voltage electrical systems.

Compatibility

Compatible with: Aeotec, ComfortClick, Eedomus, Ezlo, Fibaro HC2, HC3, Jeedom, Home Assistant, Homey, Hubitat, RazBerry, SmartThings, Thinka, Zipato gateways and Z-Wave JS library

Warranty

All HELTUN products come with 3 years extendable warranty

 

Technical Specifications:

• Dimensions: 50x50x26mm

• Material: Flame retardant plastic

• Maximum resistive load: 16А, 4000W @ 220V

• Relay switching with HELTUN Advanced Zero-Cross Technology

• Relay lifetime: 100.000 cycles

• External floor temperature sensor

• NTC 10kΩ (included)

• Measurement range: -30°C to +80°C

• Accuracy: ±0.5°C

• Energy consumption meter

• Operating temperature: 0°С to +60°С

• Power supply: 85-265VAC 50Hz/60Hz, or 24-48VDC

• Power consumption: <1W

• IP class: IP21

Reviews

There are no reviews yet.

Be the first to review “HELTUN High Load Switch Z-wave Plus v2”

Your email address will not be published. Required fields are marked *