MCOHome Fan Coil Thermostat MH8-FC

AED 440

MCOHome Fan Coil Thermostat is a ZWave-enabled device for indoor temperature control

  • Capacitive touch buttons
  • Tempered glass panel, PC alloy enclosure
  • Precise temperature calibration function
  • Non-volatile Memory, the working state saved even power failure
  • Intelligent on/off control of the 3-speed fan, electric (ball) valve or air-valve
  • Easily steel frame back plate installation


All MCOHome products purchased from iHomeFuture come with two years extended warranty


MCOHome MH8-FC Zwave Fan Coil Thermostat - 2 Pipe

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control. It is mainly applied to a 2-pipe Fan coil system. It can read room temperature and local time, and automatically control fan speed based on the temperature difference. The device is of high reliability and practicability. This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from any other manufacturers.

The thermostat is suggested to be installed indoors, in a place with around 1.5m height above the floor which represents the average room temperature. It should be away from direct sunlight, any cover, or any heat source, to avoid false signal for temperature control.


  • Applied to control fan coil of central AC (2 pipes)
  • Tempered glass panel with capacitive buttons
  • Clear display with basic control information
  • With Cooling, Heating, Ventilation modes
  • Intelligent on/off control of 3-speed fan, and electric valve
  • Power Supply: 230VAC, 50 / 60HZ
  • Working Environment: 0~55℃; <95% RH(Non-condensation)
  • Dimensions: 86 x 86 x 41 mm Installation: flush mounted in 86 x 86mm junction box
  • Built-in Z-Wave module EU; Optional: RS485, WIFI




Technical Details

  • Z-Wave frequency: 868.42MHz(EU)

  • Power Supply: AC85V~260V, 50/60HZ
  • Resistive Load: ≤3A
  • Self Consumption:< 1W
  • Display Accuracy: 0.1 ℃
  • Working Environment: 0~55℃; <95% RH(Non-condensation)
  • Temperature Setting:5~35 ℃(Adjustable)
  • Dimension:86 x 86 x 42mm
  • Hole Pitch:60-65mm (86 Standard junction box)


All MCOHome products purchased from iHomeFuture come with two years extended warranty