Aeotec Z-Wave Plus WallMote Quad

AED 416

Z-Wave Aeotec WallMote Quad brings natural, intrinsic control to the connected home.

Controls up to 16 scenes or Z-Wave devices
Click, long-press, or slide to activate automation scenarios and dim associated Z-Wave lights
Built-in rechargeable battery with easy micro USB access
Simple and elegant installation
Bank-grade AES-128 encryption for safer communication
Requires Z-Wave Controller (sold separately)
Z-Wave Plus Certified

Warranty

All Aeotec products purchased from iHomeFuture come with 2 years extendable warranty

Category: Aeotec

Description

Wireless Z-Wave Control on Tap of a Finger

The Aeotec WallMote is a Z-Wave scene controller, capable of controlling hundreds of devices of more than a dozen Z-Wave scenes. When connected to your Z-Wave Controller, get creative with personalized control combinations of your lights, appliances, and Z-Wave devices.

Design focused and battery-operated, the Aeotec WallMote lets you directly control 16 different Z-Wave scenes each with more than 15 devices in them. With touch and touch slide capabilities, WallMote offers unparalleled functionalities for your modern smart home. The Quad WallMote from Aeotec is a portable, wall-mounted, smart Z-Wave remote controller.

Its surface is fitted with an RGB LED to indicate button actions, that are also accompanied by audible feedback and vibration. The WallMote Quad is also a security Z-Wave device and supports Over The Air (OTA) feature for the product firmware upgrade.

Control on Tap of a Finger

Whether you control one or many Z-Wave devices - you can do it all with a single tap.

Each of WallMote's buttons can be programmed to control one or a few Z-Wave devices. A single tap on its smooth WallMote surface can change a single light or a whole room.

Each button is touch-sensitive, meaning you can access new commands and control scenes simply by holding your finger a little longer.

Wireless switch

WallMote and WallMote Quad offer a fine-tuned antenna capable of communicating over an open range of over 150 meters.

Always up-to-date

Both WallMote and WallMote Quad are capable of receiving wireless firmware updates via Z-Wave Plus so that they are always up to date.

Extremely elegant

With its minimalist design that measures just 7.7cm wide and a slender 1.9cm deep, both WallMote and WallMote Quad are perfectly balanced.

Rechargeable battery

Without the need to ever change a battery, WallMote and WallMote Quad are both powered by a rechargeable lithium battery that can easily be recharged via the provided micro USB cable.

Haptic feedback

When you press WallMote's touch glass you will feel the change -even you may not even be present to see things change. WallMote's haptic engine confirms your every action via a click sensation.

Gen5

As a part of Aeotec's Gen5 range of Z-Wave devices, Wallmote was built upon the latest version of Z-Wave- Z-Wave Plus. Cutting-edge performance and security is crafted into this most advanced battery-powered wall switch.

Wireless wall switch for wireless home control

Because of its direct communication with your Z-Wave gateway, WallMote can be used to control anything that your gateway can. Even things that are not Z-Wave like Smart lighting from Philips Hue or Connected music from Sonos. This means that if it is connected to your gateway, you may simply add it to a scene that WallMote can control.